Cresco 8SW
Lightweight pedestrian spreader for smaller sites and shorter runs.
Small Sites and Short Runs
The Cresco 8SW is designed for smaller sites and shorter application runs using dry, free-flowing materials. It performs best in controlled conditions where walking pace and material consistency can be maintained. It is not intended for hard-surface winter work, abrasive materials, or repeated seasonal use where heavier-duty construction and higher capacity are required.
- Choose settings based on material size and weight.
- Calibrate once per material — then run consistently.
- Thoroughly wash and dry after use to reduce corrosion risk.
Manual Pattern Control
Left and right adjustment allows basic spread balancing across different materials
Solid Rod Control Linkage
Reduces mechanical complexity and increases reliability.
Lightweight Construction
Easy to manoeuvre and handle in confined spaces
Straightforward Operation
Minimal setup for ease of use.
Build Quality & Components
Close-ups that show what matters.
Outlet shape adapts to different materials for even pattern distribution. Quick-change design allows field swaps without tools. Dedicated summer and winter sliders — opening geometry optimised for fertiliser and salt behaviour respectively.
Small Sites and Short Runs
The Cresco 8SW is designed for smaller sites and shorter application runs using dry, free-flowing materials. It performs best in controlled conditions where walking pace and material consistency can be maintained. It is not intended for hard-surface winter work, abrasive materials, or repeated seasonal use where heavier-duty construction and higher capacity are required.
- Choose settings based on material size and weight.
- Calibrate once per material — then run consistently.
- Thoroughly wash and dry after use to reduce corrosion risk.
What This Spreader is Designed to Do
Provide simple, manually controlled spreading for small areas.
Manual Pattern Control
Left and right adjustment allows basic spread balancing across different materials
Solid Rod Control Linkage
Reduces mechanical complexity and increases reliability.
Lightweight Construction
Easy to manoeuvre and handle in confined spaces
Straightforward Operation
Minimal setup for ease of use.
Technical Specs
All the details you need to confirm fit — upfront.
| Hopper Capacity | 30L |
|---|---|
| Aperture Settings | 0-20 |
| Spread Width | 1.5-6m (material dependent) |
| Wheels | Moulded Tread Wide Wheels |
| Box Size | 53cm x 68cm x 45cm |
| Agitation | Pin Agitator |
|---|---|
| Chassis | Powder Coated Steel |
| Axle | Powder Coated Steel |
| Linkage | Solid Rod |
| Backstand | Foldable Backstand |
| Handlebar | Cushioned Grip Loop Handle |
| Handle Bar Grips | Sleeve |
| Warranty | 3 years |
|---|---|
| SKU | CR008SW |
Specifications may vary. Contact your distributor for detailed product information.
Build Quality & Components
Close-ups that show what matters: wear points, control interfaces, and the parts that keep behaviour consistent.
Outlet shape adapts to different materials for even pattern distribution. Quick-change design allows field swaps without tools. Dedicated summer and winter sliders — opening geometry optimised for fertiliser and salt behaviour respectively.
Built-in outlet control that cuts off the spread to one side. Keeps fertiliser and salt where they're wanted along paths, beds, and boundaries — clean edges without wasted material or a second pass.
Provides direct, positive action controlling the on/off. Unlike cable linkages, a solid rod doesn't stretch or seize, so the action stays consistent over the life of the machine.
Calibration & System Accuracy
Calibration shouldn't be a guessing game. Cresco uses a consistent approach across the range so operators and distributors aren't juggling different methods for each model.
- Eradicates striping and under/over application.
- Improves winter coverage consistency when safety depends on accurate application.
- Gives distributors a single source of guidance.
Best For
Fertilizer Application
Designed specifically for wide, uniform, and adjustable application of fertilizers, with the ability to fine-tune for smaller and larger granules.
Seed Application
Ideal for spreading seeds, including lighter materials like grass seed, with precision and accuracy.
Precise Border Control
The border control slider allows users to shut off the left side of the spreader, preventing material from spreading onto patios, paths, and flower borders where it's not needed.
Compare Within The Range
Other Models In This Range
Different capabilities for different needs.
This ModelCresco 8SW◀ | Heavier / SpecialistCresco 10SW | |
|---|---|---|
| Typical area per session | Up to 300 m² | Up to 1,000 m² |
| Frequency of use | Occasional | Occasional |
| Materials best suited to | Fertiliser, seed | Primarily fertiliser & seed |
| Comfort on long routes | Basic | Moderate |
| Precision & control | Standard | Standard |
| Best for | Homeowner | Homeowner |
Homeowner
Homeowner
Ready to purchase — or need help choosing?
Find a local distributor, use the selector to confirm fit, or go straight to setup and calibration guidance.