Cresco 10SW
Comfortable, easy-to-use spreader for everyday lawn care and ocassional winter applications.
Built for Mixed Use on Small to Medium Sites
The Cresco 10SW is designed for smaller sites with a focus on summer spreading (fertiliser and seed) but the ability to perform ocassional winter applications (salt and ice-melt). It performs best on shorter routes with dry, free-flowing materials and controlled walking pace. It is not intended for repeated winter use with salt , or sustained seasonal uses where higher-capacity or heavier-duty models are required.
- Choose settings based on material size and weight.
- Calibrate once per material — then run consistently.
- Thoroughly wash and dry after use to reduce corrosion risk.
Material-Specific Flow Control
Interchangeable sliders allow output requirements to be matched to fertiliser or salt
Border Control Mechanism
Enables one-sided shut-off to limit spread onto flower beds and hard surfaces
Compact, Manoeuvrable Design
Suited to confined spaces and short application runs
Low-Complexity Construction
Simple mechanical systems reduce setup time
Build Quality & Components
Close-ups that show what matters.
Outlet shape adapts to different materials for even pattern distribution. Quick-change design allows field swaps without tools. Dedicated summer and winter sliders — opening geometry optimised for fertiliser and salt behaviour respectively.
Built for Mixed Use on Small to Medium Sites
The Cresco 10SW is designed for smaller sites with a focus on summer spreading (fertiliser and seed) but the ability to perform ocassional winter applications (salt and ice-melt). It performs best on shorter routes with dry, free-flowing materials and controlled walking pace. It is not intended for repeated winter use with salt , or sustained seasonal uses where higher-capacity or heavier-duty models are required.
- Choose settings based on material size and weight.
- Calibrate once per material — then run consistently.
- Thoroughly wash and dry after use to reduce corrosion risk.
WHAT THIS SPREADER IS DESIGNED TO DO
Designed for spreading seed and fertiliser across lawns and garden areas, with the ability to handle occasional salt or de-icer use in winter. Its comfortable handle and stable stand make it easy to set up, control, and use over small to medium areas.
Material-Specific Flow Control
Interchangeable sliders allow output requirements to be matched to fertiliser or salt
Border Control Mechanism
Enables one-sided shut-off to limit spread onto flower beds and hard surfaces
Compact, Manoeuvrable Design
Suited to confined spaces and short application runs
Low-Complexity Construction
Simple mechanical systems reduce setup time
Technical Specs
All the details you need to confirm fit — upfront.
| Hopper Capacity | 30L |
|---|---|
| Aperture Settings | 0-20 |
| Spread Width | 1.5-6m (material dependent) |
| Wheels | Moulded Tread Wide Wheels |
| Box Size | 53cm x 68cm x 45cm |
| Agitation | Pin Agitator |
|---|---|
| Chassis | Powder Coated Steel |
| Axle | Powder Coated Steel |
| Linkage | Solid Rod |
| Backstand | Solid Backstand |
| Handlebar | Ergonomic Lengthened Loop Handle |
| Handle Bar Grips | Sleeve |
| Warranty | 3-years |
|---|---|
| SKU | CR10SW |
Specifications may vary. Contact your distributor for detailed product information.
Build Quality & Components
Close-ups that show what matters: wear points, control interfaces, and the parts that keep behaviour consistent.
Outlet shape adapts to different materials for even pattern distribution. Quick-change design allows field swaps without tools. Dedicated summer and winter sliders — opening geometry optimised for fertiliser and salt behaviour respectively.
Built-in outlet control that cuts off the spread to one side. Keeps fertiliser and salt where they're wanted along paths, beds, and boundaries — clean edges without wasted material or a second pass.
Shaped to reduce bridging and dead zones. Calculated angles create smooth hopper sides which encourage consistent material flow.
Calibration & System Accuracy
Calibration shouldn't be a guessing game. Cresco uses a consistent approach across the range so operators and distributors aren't juggling different methods for each model.
- Eradicates striping and under/over application.
- Improves winter coverage consistency when safety depends on accurate application.
- Gives distributors a single source of guidance.
Best For
Summer Spreading with Occassional Winter Application
This spreader is ideal for users whose main focus is high quality turf but also need the ocassional application of salt in the winter.
Precise Application
Perfect for those who require accurate spreading of various materials like fertilizer, grass seed, and dry free flowing salt, with features for pattern adjustment and border control.
Small Lawns and Garden Areas
Provides controlled fertiliser and seed application where consistent coverage is required.
Compare Within The Range
Other Models In This Range
Different capabilities for different needs.
Lighter-dutyCresco 8SW | This ModelCresco 10SW◀ | Heavier / SpecialistCresco 20SW | |
|---|---|---|---|
| Typical area per session | Up to 300 m² | Up to 1,000 m² | Up to 1,000 m² |
| Frequency of use | Occasional | Occasional | Occasional |
| Materials best suited to | Fertiliser, seed | Primarily fertiliser & seed | Mixed materials |
| Comfort on long routes | Basic | Moderate | Moderate |
| Precision & control | Standard | Standard | Standard |
| Best for | Homeowner | Homeowner | Homeowner |
Homeowner
Homeowner
Homeowner
Ready to purchase — or need help choosing?
Find a local distributor, use the selector to confirm fit, or go straight to setup and calibration guidance.