Cresco 30SWS
High-capacity spreader for intensive use in the most demanding environments.
Built for the Toughest Conditions
The Cresco 30SWS is designed for high level use in environments where heavy use of fertiliser and winter materials accelerate corrosion and wear. It is intended for long runs, frequent operation, and lengthy exposure to aggressive materials. Where powder coated steel frames degrade over time, the stainless framework provides higher levels of protection. This model prioritises longevity and reliability under severe conditions.
- Choose settings based on material size and weight.
- Calibrate once per material — then run consistently.
- Thoroughly wash and dry after use to reduce corrosion risk.
Corrosion Resistance
Stainless steel frame and fasteners resist corrosion from fertiliser and salt
Stable Material Flow
The spider agitation system aids the break-up of any small clumps of material before it reaches the drop holes. Provides improved agitation over conventional pin agitation.
Ground-Driven Consistency
Output remains proportional to travel speed. Consistency of drive from the gearbox is enhanced by the floating gearbox system which aids self centering. Consequently providing improved performance on slopes and longer life of gears.
Serviceable, Long-Life Design
Components are selected for durability under frequent seasonal use
Build Quality & Components
Close-ups that show what matters.
Focused on balance and stability as well as strength. The chassis design distributes load evenly across the wheelbase, making it easier to push.
Built for the Toughest Conditions
The Cresco 30SWS is designed for high level use in environments where heavy use of fertiliser and winter materials accelerate corrosion and wear. It is intended for long runs, frequent operation, and lengthy exposure to aggressive materials. Where powder coated steel frames degrade over time, the stainless framework provides higher levels of protection. This model prioritises longevity and reliability under severe conditions.
- Choose settings based on material size and weight.
- Calibrate once per material — then run consistently.
- Thoroughly wash and dry after use to reduce corrosion risk.
What This Spreader is Designed to Do
Maintain consistent spreading performance under repeated exposure to corrosive materials without loss of structural integrity.
Corrosion Resistance
Stainless steel frame and fasteners resist corrosion from fertiliser and salt
Stable Material Flow
The spider agitation system aids the break-up of any small clumps of material before it reaches the drop holes. Provides improved agitation over conventional pin agitation.
Ground-Driven Consistency
Output remains proportional to travel speed. Consistency of drive from the gearbox is enhanced by the floating gearbox system which aids self centering. Consequently providing improved performance on slopes and longer life of gears.
Serviceable, Long-Life Design
Components are selected for durability under frequent seasonal use
Technical Specs
All the details you need to confirm fit — upfront.
| Hopper Capacity | 40L |
|---|---|
| Aperture Settings | 0-20 |
| Spread Width | 1.5-6m (material dependent) |
| Wheels | 13" Pneumatic |
| Box Size | 58cm x 60cm x 67cm |
| Agitation | Spider Agitator |
|---|---|
| Chassis | Stainless Steel |
| Axle | Stainless Steel |
| Linkage | Solid Rod |
| Backstand | Solid Backstand |
| Handlebar | Bull Horn Handle |
| Handle Bar Grips | Grips |
| Warranty | 3 Years |
|---|---|
| SKU | CR30SWS |
Specifications may vary. Contact your distributor for detailed product information.
Engineering Detail
Corrosion Management Under Repeated Chemical ExposureExpand
Fertiliser and winter materials are aggressive, attacking coatings and fasteners over time. In frequent-use environments, this leads to frame degradation, seized components, and loss of spreading accuracy.
The Cresco 30SWS replaces coated structural elements with stainless steel, reducing corrosion at its source rather than relying on protective finishes. This preserves structural integrity, maintaining component alignment, and extending service life in environments where standard frames deteriorate.
Many of the mechanisms used across the Cresco manual spreader range are the result of incremental changes made in response to how spreaders are actually used day to day.
Rather than developing features in isolation, Cresco designs are refined through a continuous feedback loop between field use and manufacturing — observing wear points, material behaviour, operator workarounds, and failure modes, then engineering those issues out at source.
This approach prioritises consistency, durability, and predictable behaviour. The result is equipment that feels familiar to use while quietly resolving the practical problems that earlier generations struggled with.
Build Quality & Components
Close-ups that show what matters: wear points, control interfaces, and the parts that keep behaviour consistent.
Focused on balance and stability as well as strength. The chassis design distributes load evenly across the wheelbase, making it easier to push.
Positioned to maximise flow over the drop-hole area. The spider agitation system aids the break-up of any small clumps of material before it reaches the drop holes. Provides improved agitation over conventional pin agitation.
Maintains alignment under load and on slopes. Axle gearbox engagement over a large area ensures precise transmission of drive to the impeller and agitator system.
Outlet shape adapts to different materials for even pattern distribution. Quick-change design allows field swaps without tools. Dedicated summer and winter sliders — opening geometry optimised for fertiliser and salt behaviour respectively.
Shaped to reduce bridging and dead zones. Calculated angles create smooth hopper sides which encourage consistent material flow.
Works without creating obstruction points. Mesh size calibrated to catch debris while allowing consistent material flow.
Helps keep seed, fertiliser, and salt dry while you work, so material flows more evenly and doesn’t clump in damp or changeable weather.
Calibration & System Accuracy
Calibration shouldn't be a guessing game. Cresco uses a consistent approach across the range so operators and distributors aren't juggling different methods for each model.
- Eradicates striping and under/over application.
- Improves winter coverage consistency when safety depends on accurate application.
- Gives distributors a single source of guidance.
Best For
Summer & Winter Maintenance Teams
Designed for extensive repeated fertiliser, salt and ice melt applications.
Sports Grounds and Large Estates
Suitable for frequent fertiliser and seed application where corrosion resistance extends service life.
High-Exposure Environments
Performs reliably where aggressive materials and moisture accelerate wear on powder coated steel frames.
Compare Within The Range
Other Models In This Range
Different capabilities for different needs.
Lighter-dutyCresco 30SWP | This ModelCresco 30SWS◀ | Heavier / SpecialistCresco 40S | |
|---|---|---|---|
| Typical area per session | 4,000+ m² | 4,000+ m² | 5,000+ m² |
| Frequency of use | Daily/Sustained | Daily/Sustained | Daily/Sustained |
| Materials best suited to | Mixed materials | Mixed + corrosive | Primarily fertiliser & seed |
| Comfort on long routes | Very High | Very High | Maximum |
| Precision & control | High | High | Precision-focused |
| Best for | Estate, professional contractor | Estate, professional contractor | Precision Turf Professionals |
Estate, professional contractor
Estate, professional contractor
Precision Turf Professionals
Ready to purchase — or need help choosing?
Find a local distributor, use the selector to confirm fit, or go straight to setup and calibration guidance.